View ADV7511W_3105686.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

165 mhz, high performance hdmi transmitter ADV7511W rev. 0 information furnished by analog devices is believed to be accurate and reliable. however, no responsibility is assumed by analog devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. one technology way, p.o. box 9106, norwood, ma 02062-9106, u.s.a. tel: 781.329.4700 www.analog.com fax: 781.461.3113 ?2011 analog devices, inc. all rights reserved. features general incorporates hdmi v.1.4a features 3d video support extended colorimetry 165 mhz supports all video formats up to 1080p and uxga supports gamut metadata packet transmission integrated cec buffer/controller compatible with dvi v.1.0 and hdcp v.1.3 video/audio inputs accept logic levels from 1.8 v to 3.3 v digital video 3d video ready programmable 2-way color space converter supports rgb, ycbcr, and ddr supports itu656-based embedded syncs automatic input video format timing detection (cea-861-e) digital audio supports standard spdif for stereo lpcm or compressed audio up to 192 khz high bit-rate audio (hbr) 8-channel uncompressed lpcm i 2 s audio up to 192 khz special features for easy system design on-chip mpu with i 2 c master to perform hdcp operations and edid reading operations 5 v tolerant i 2 c and hpd i/os, no extra device needed no audio master clock needed for supporting spdif and i 2 s on-chip mpu reports hdmi events through interrupts and registers qualified for automotive applications applications automotive infotainment gaming consoles pcs dvd players and recorders digital set-top boxes a/v receivers functional block diagram tx0+/tx0? ADV7511W cec cec controller/ buffer audio data capture spdif video data capture registers and configuration logic hdcp and edid microcontroller hdcp keys hdcp encryption cec_clk i 2 s[3:0] mclk lrclk sclk d[23:0] vsync hsync de clk hpd int sda scl 4:2:2 4:4:4 and color space converter i 2 c slave i 2 c master tx1+/tx1? tx2+/tx2? txc+/txc? ddcsda ddcscl 09732-001 tmds outputs figure 1. general description the ADV7511W is a 165 mhz high-definition multimedia interface (hdmi?) transmitter, which is ideal for automotive entertainment products including dvd players/recorders, digital set-top boxes, a/v receivers, gaming consoles, and pcs. the digital video interface contains an hdmi v.1.4a/dvi v.1.0- compatible transmitter and supports all hdtv formats. the ADV7511W supports hdmi v1.4a-specific features (3d video and extended colorimetry) in addition to x.v.color?, high bit rate audio, and programmable avi infoframes. internal hdcp keys allow the secure transmission of protected content as specified by the hdcp v.1.3 protocol. the ADV7511W supports both spdif and 8-channel i 2 s audio. its high fidelity 8-channel i 2 s can transmit either stereo or 7.1 surround audio up to 768 khz. the spdif can carry compressed audio including dolby? digital, dts?, and thx?. fabricated in an advanced cmos process, the ADV7511W is provided in a 64-lead lqfp surface-mount plastic package with exposed paddle and is specified over the ?40c to +105c temperature range. www..net
ADV7511W rev. 0 | page 2 of 12 table of contents features .............................................................................................. 1 ? applications....................................................................................... 1 ? functional block diagram .............................................................. 1 ? general description ......................................................................... 1 ? revision history ............................................................................... 2 ? specifications..................................................................................... 3 ? electrical specifications............................................................... 3 ? absolute maximum ratings............................................................ 5 ? explanation of test levels............................................................5 ? esd caution...................................................................................5 ? pin configuration and function descriptions..............................6 ? applications information .................................................................8 ? design resources ..........................................................................8 ? outline dimensions ..........................................................................9 ? ordering guide .............................................................................9 ? automotive products ....................................................................9 ? revision history 5 /11revision 0: initial version
ADV7511W rev. 0 | page 3 of 12 specifications electrical specifications table 1. parameter test conditions/ comments temp test level 1 min typ max unit digital inputs data inputsvideo and audio, cec_clk input voltage, high (v ih ) full vi 1.35 3.5 v input voltage, low (v il ) full vi ?0.3 +0.7 v input capacitance 25c viii 1.0 1.5 pf i 2 c lines (ddcsda, ddcscl, sda, scl) input voltage, high (v ih ) full vi 1.19 5.5 v input voltage, low (v il ) full vi ?0.3 +0.8 v cec input voltage, high (v ih ) full vi 2.0 5.5 v input voltage, low (v il ) full vi ?0.3 +0.8 v output voltage, high (v oh ) full vi 2.5 3.63 v output voltage, low (v ol ) full vi ?0.3 +0.6 v hpd input voltage, high (v ih ) full vi 1.3 5.5 v input voltage, low (v il ) full vi ?0.3 +0.8 v thermal characteristics thermal resistance jc junction-to-case full v 20 c/w ja junction-to-ambient full v 43 c/w ambient temperature full v ?40 +25 +105 c dc specifications input leakage current (i il ) 25c vi ?1 +1 a power supply 1.8 v supply voltage (dvdd, avdd, pvdd, bgvdd) full iv 1.71 1.8 1.90 v 3.3 v supply voltage (dvdd_3v) full 3.15 3.3 3.45 v power-down current 25c 100 a transmitter total power (1.8 v power = 200 mw and 3.3 v power = 1 mw) 1080p, 24 bit, typical random pattern full vi 201 mw ac specifications tmds output clock frequency 25c iv 20 165 mhz tmds output clock duty cycle 25c iv 48 52 % input video clock frequency full 165 mhz input video data setup time (t vsu ) 2 full iv 1.8 ns input video data hold time (t vhld ) 2 full iv 1.3 ns tmds differential swing 25c vii 900 1100 1200 mv differential output timing low-to-high transition time 25c vii 75 95 ps high-to-low transition time 25c vii 75 95 ps vsync and hsync delay from de falling edge 25c iv 1 ui 3 to de rising edge 25c iv 1 ui 3
ADV7511W rev. 0 | page 4 of 12 parameter test conditions/ comments temp test level 1 min typ max unit audio ac timing sclk duty cycle when n/2 is an even number full iv 40 50 60 % when n/2 is an odd number full iv 49 50 51 % i 2 s[3:0], spdif setup time (t asu ) full iv 2 ns i 2 s[3:0], spdif hold time (t ahld ) full iv 2 ns lrclk setup time (t asu ) full iv 2 ns lrclk hold time (t ahld ) full iv 2 ns cec cec_clk frequency full viii 3 12 4 100 mhz cec_clk accuracy full viii ?2 +2 % i 2 c interface scl clock frequency full 400 khz sda setup time (t dsu ) full 100 ns sda hold time (t dho ) full 100 ns setup for start (t stasu ) full 0.6 s hold time for start (t stah ) full 0.6 s setup for stop (t stosu ) full 0.6 s 1 see the section. explanation of test levels 2 this is measured at 0.9 v. the relationship betw een clock and data is programmable in 400 ps steps. 3 ui is the unit interval. 4 12 mhz crystal oscillator for default register settings.
ADV7511W rev. 0 | page 5 of 12 absolute maximum ratings table 2. parameter rating digital inputs (sda, scl, ddcsda, ddcscl, hpd, pd, cec) ?0.3 v to +5.5 v audio/video digital inputs (mclk, spdif, i2s[3:0], sclk, hsync, de, vsync, cec_clk) ?0.3 v to +3.63 v digital output current 20 ma operating temperature range ?40c to +105c storage temperature range ?65c to +150c maximum junction temperature 150c maximum case temperature 150c stresses above those listed under absolute maximum ratings may cause permanent damage to the device. this is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. exposure to absolute maximum rating conditions for extended periods may affect device reliability. explanation of test levels i. 100% production tested. ii. 100% production tested at 25c and sample tested at specified temperatures. iii. sample tested only. iv. parameter is guaranteed by design and characterization testing. v. parameter is a typical value only. vi. 100% production tested at 25c; guaranteed by design and characterization testing. vii. limits defined by hdmi specification; guaranteed by design and characterization testing. viii. parameter is guaranteed by design. esd caution
ADV7511W rev. 0 | page 6 of 12 pin configuration and fu nction descriptions dvdd d12 txc? hsync 2 3 4 7 6 5 1 8 9 10 12 13 14 15 16 11 47 46 45 42 43 44 48 41 40 39 37 36 35 34 33 38 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 pin 1 top view (not to scale) de d0 d1 d2 d3 d4 d5 d6 d7 d8 clk d9 dvdd d10 d11 vsync spdif mclk i2s0 i2s1 i2s2 i2s3 sclk lrclk pvdd dvdd bgvdd r_ext avdd hpd d13 d14 d15 d16 d17 d18 d19 d20 d21 d22 d23 sda scl ddcsda ddcscl txc+ avdd tx0? tx0+ pd tx1? tx1+ avdd tx2? tx2+ int dvdd_3v cec dvdd cec_clk ADV7511W notes 1. the lqfp has an exposed pad that should be connected to gro und. 09732-002 figure 2. pin configuration table 3. pin function descriptions pin o. neonic tpe description 1, 11, 31, 51 dvdd power 1.8 v power supply. these pins should be filtered and as quiet as possible. 2 vsync input vertical sync input. 3 spdif input spdif (sony/philips digital interface) audio input. 4 mclk input audio reference clock input. 5 i2s0 input i 2 s channel 0 audio data input. 6 i2s1 input i 2 s channel 1 audio data input. 7 i2s2 input i 2 s channel 2 audio data input. 8 i2s3 input i 2 s channel 3 audio data input. 9 sclk input i 2 s audio clock input. 10 lrclk input left/right channel signal input. 12 pvdd power 1.8 v pll power supply. 13 bgvdd power band gap power supply. 14 r_ext input this pin sets the internal reference currents. 15, 19, 25 avdd power 1.8 v power supply for tmds outputs. 16 hpd input hot plug? detect signal input. 17, 18 txc?, txc+ differential outp ut differential tmds clock output. 20, 21 tx0?, tx0+ differential output differential tmds output channel 0. 22 pd input power-down control and i 2 c address selection. 23, 24 tx1?, tx1+ differential output differential tmds output channel 1. 26, 27 tx2?, tx2+ differential output differential tmds output channel 2. 28 int output interrupt signal output. 29 dvdd_3v power 3.3 v power supply.
ADV7511W rev. 0 | page 7 of 12 pin no. mnemonic type description 30 cec input/output cec data signal. 32 cec_clk input cec clock is an oscillator from 3 mhz to 100 mhz. 33 ddcscl control serial port data clock to sink. 34 ddcsda control serial port data i/o to sink. 35 scl control serial port data clock input. 36 sda control serial port data i/o. 37 to 50, 52, 54 to 62 d[23:0] input video data input 53 clk input video input clock. 63 de input data enable sign al input for digital video. 64 hsync input horizontal sync input. epad power the lqfp has an exposed pa d that should be connected to ground.
ADV7511W rev. 0 | page 8 of 12 applications information design resources evaluation kits, reference design schematics, hardware and software guides, and other support documentation are available from analog devices, inc., engineer zone . other references include the following: ? eia/cea-861d , a technical specifications document, describes audio and video infoframes, as well as the e-edid structure for hdmi. it is available from the consumer electronics association (cea). ? high-definition multimedia interface specification version 1.4a , a defining document for hdmi v.1.4a, and the high-definition multimedia interface compliance test specification version 1.4a are available from hdmi licensing, llc. ? high-bandwidth digital content protection system revision 1.3 , the defining technical specifications document for the hdcp v.1.3, is available from digital content protection, llc.
ADV7511W rev. 0 | page 9 of 12 outline dimensions compliant to jedec standards ms-026-bcd-hd 1 16 17 32 32 49 64 48 33 12.20 12.00 sq 11.80 10.20 10.00 sq 9.80 1 16 17 49 64 48 33 pin 1 top view (pins down) bottom view (pins up) exposed pad 03-16-2010-a view a 1.60 max seating plane 0.75 0.60 0.45 1.00 ref 0.15 0.05 0.08 coplanarity 7 0 0.20 0.09 view a rotated 90 ccw 1.45 1.40 1.35 0.27 0.22 0.17 0.50 lead pitch 7.50 ref sq for proper connection of the exposed pad, refer to the pin configuration and function descriptions section of this data sheet. 5.10 5.00 sq 4.90 figure 3. 64-lead low profile quad flat package [lqfp_ep] (sw-64-2) dimensions shown in millimeters ordering guide model 1 , 2 temperature range package description package option ADV7511Wbswz ?40c to +105c 64-lead low profile quad flat package with exposed pad [lqfp_ep] sw-64-2 ADV7511Wbswz-rl ?40c to +105c 64-lead low profile quad flat package with exposed pad [lqfp_ep], tape and reel sw-64-2 eval-ADV7511W-akz evaluation kit 1 z = rohs compliant part. 2 w = qualified for auto motive applications. automotive products the ADV7511W models are available with controlled manufacturing to support the quality and reliability requirements of automoti ve applications. note that these automotive models may have specifications that differ from the commercial models; therefore, desi gners should review the specifications section of this data sheet carefully. only the automotive grade products shown are available for use in automotive applications. contact your local analog devices account representative for specific product ordering information and to obtain the specific automotive reliability reports for these models.
ADV7511W rev. 0 | page 10 of 12 notes
ADV7511W rev. 0 | page 11 of 12 notes
ADV7511W rev. 0 | page 12 of 12 notes i 2 c refers to a communications protocol originally developed by philips semiconductors (now nxp semiconductors). hdmi, the hdmi logo, and high-definition mult imedia interface are trademarks or registered trademarks of hdmi licensing llc in the united states and other countries. ?2011 analog devices, inc. all rights reserved. trademarks and registered trademarks are the property of their respective owners. d09732-0-5/11(0)

▲Up To Search▲

Price & Availability of ADV7511W

	To Download ADV7511W Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .